Lincat ESLR6C Silverlink 600 Electric Oven Range
Lincat ESLR6C Silverlink 600 Electric Oven Range
- Description
- Additional information
- Delivery Information
Description
- Compact 600mm deep footprint – perfect for care homes as well as smaller pubs and restaurants
- Four hotplates 2 x 2.0kW, 2 x 1.5kW with six-position control knob for each plate Рhigher power for saut̩ing at the front, lower power to the rear ideal for simmering
- Automatic power reduction, if the pan boils dry or is removed, prolonging hotplate life
- Easy clean fully pressed and sealed hob
- Powerful 4kW fan assisted oven for uniform heat distribution and consistent cooking
- To suit install requirements, the ESLR6C can be wired as either single or three phase
- Double insulated doors, sode and back panels providing safer operation, greater efficiency and economy
- Castors at rear to enable unit to be pulled out for deeper cleans
Additional information
| Dimensions | 600 × 670 × 932 mm |
|---|---|
| Lead Time | Please Call* |
| Power Type | |
| Total Power kW | 11 |
| Voltage | 230/400 |
| Warranty | 2 Years Parts and Labour Warranty |
*All delivery times are subject to stock availability
For up to date lead times, please call the customer service team on 02380 452550
**Orders under £70+VAT on cookware, glass and crockery may take slightly longer to deliver, please allow 2-3 working days for delivery.
Kitchen equipment is normally sent direct from manufacturers, some items may have extended lead times although most items will be delivered to you within 7 working days, please note we cannot guarantee delivery times for any products. Please ensure that you have assessed all the technical specification, available on the website prior to ordering. Should you remain unsure of what product is right for you, please call one of our specialists for free and impartial advice.
FREE DELIVERY on all orders over £199 exVAT. Orders under £199 exVAT are subject to a £12.50 delivery charge.
Delivery is UK mainland only. All deliveries are subject to there being a reasonable place for parking and unloading of the vehicle. Please note it is your responsibility to check that the goods physically fit the site, we cannot accept responsibility if it will not fit. Any carriage charges caused by an aborted delivery are the customers responsibility, should you have any queries regarding access etc. please contact us and we will do our best to assist. Should a site survey be required, this can be done by ourselves for a small charge. Standard delivery is made by one driver. For larger bulky items assistance will be required on site unless the item is small enough to be handled by the driver. Given adequate notice we are able to supply additional labour at an extra cost. Delivery of machines, refrigeration and all flat-pack items will be made to the ground floor entrance to the building. It does not include negotiating lifts or stairs. Delivery to site does not include unpacking and siting of the equipment this maybe available at an extra cost please contact us. If you require a more urgent delivery, our sales team will provide you with the best delivery options available.
